Energy and Green Technologies

NAED Discloses Evaluation of PV-1 4.6 GW Tandem Solar Cell Production Line

NAED Energy Holding announced the operational capabilities of the PV-1 tandem solar cell production line, recording a production rate of 16,000 half-cut wafers per hour per line.

2026-11-16
3 min read
15 views
certi.news Editorial Team
NAED Discloses Evaluation of PV-1 4.6 GW Tandem Solar Cell Production Line

NAED Energy Holding Inc. disclosed details of the evaluation of its production line named (PV-1), dedicated to the manufacturing of perovskite-silicon heterojunction tandem solar cells (T2X). This announcement represents a technical step highlighting the efficiency and speed of integrated production lines for manufacturing next-generation cells.

According to the published technical data, the capacity of each (PV-1) production line reaches approximately 16,000 G12 half-cut wafers per hour, at a rate of 400 wafers per 90-second time index, which is the rate determined by the Physical Vapor Deposition (PVD) tool integrated into the line known as (ITO-1). In contrast, the four Plasma-Enhanced Chemical Vapor Deposition (PECVD) units in the line are designed to match a faster index of 76 seconds, equivalent to about 18,950 wafers per hour.

Planning and Production Capacity of the Six-Line Site

According to the company's approved planning bases, which include 85% operational availability, a 97.5% yield rate, and a targeted cell efficiency of 30% for the (T2X) program, a single (PV-1) line produces approximately 116 million cells and 0.77 gigawatts of tandem cells annually. When operating a site comprising six lines with a total production of 96,000 wafers per hour, the estimated capacity reaches about 4.6 gigawatts annually.

Performance Comparison and Technical Modeling

The company clarified that the figures related to productivity and capacity are estimated values, while cell efficiency was modeled to reach 34.4% according to specific test standards including an open-circuit voltage (Voc) at 1.969 volts, a short-circuit current (Jsc) at 20.18 mA/cm², and a fill factor of 0.867 for a half-cell with an area of 217.2 cm². For comparison, the highest published efficiencies for perovskite-silicon tandem cells of this size range between 32% and 33%.

What This Means for the Solar Energy Sector

This evaluation represents a shift toward integrating the complex tandem cell manufacturing process—which includes wet cleaning, deposition, printing, and testing—into a single integrated line. According to estimates, the annual production of a six-line site provides enough cells for about 7.7 million solar panels with a capacity of 600 watts each, which is sufficient to generate electricity meeting the needs of about 650,000 homes in the United States for a full year based on standard consumption indicators, with continuous power generation lasting between 25 to 30 years.

News source
CleanTechnica
Open original source ↗
c
Author

certi.news Editorial Team

In the same category

You may also like

View all news