Chips and Semiconductors

Acoustic Micro Imaging: A Technical Guide to Inspecting Advanced Packaging Defects in Semiconductors

The semiconductor industry is increasingly relying on Acoustic Micro Imaging (AMI) technology to detect structural defects and air voids within advanced packaging without damaging the chips, supported by AI algorithms to increase productivity efficiency.

2026-11-16
4 min read
16 views
certi.news Editorial Team
Acoustic Micro Imaging: A Technical Guide to Inspecting Advanced Packaging Defects in Semiconductors

Inspection and auditing processes are gaining critical importance in modern semiconductor manufacturing environments, especially with the widespread shift toward Advanced Packaging technologies. The importance of these processes is not limited to increasing quality and yield rates, but extends to ensuring the long-term operational reliability of the chips. As the sector moves toward reducing component dimensions and narrowing the spacing between electronic connections, micro-sized defects are causing complex engineering challenges; air voids and delaminations lead to catastrophic electrical or mechanical failures during actual operation.

To face these challenges, Acoustic Micro Imaging (AMI) technology has emerged, which is a technology that relies on high-frequency ultrasound to inspect the internal structure of chips that is invisible to the naked eye or through traditional inspection methods.

How Does Acoustic Micro Imaging Technology Work?

At its core, AMI technology relies on a transducer that converts electrical pulses into high-frequency ultrasound waves. Since ultrasound waves do not travel through air with the same efficiency as they do through solid materials, any air void or separation between layers within the electronic component causes a distinct reflection of the waves, allowing for the formation of an accurate image of the internal defects.

The transducers used vary depending on the nature of the samples to be inspected, as the appropriate frequency is determined based on the layer depth and the type of material. By moving the transducer across the surface of the sample, the device generates multiple images that are analyzed via specialized software to determine whether the part complies with specifications or should be rejected. The revealed defects vary between explicit air voids and thinning of bonding materials on solder pads, in addition to irregularities in Thermal Interface Material (TIM) layers.

Comparing AMI with Other Inspection Technologies and X-ray

Although AMI technology has the ability to provide detailed data without destroying the chip, research and development centers sometimes resort to destructive testing to validate concepts in the early stages before fully adopting acoustic inspection in production lines. For example, modern capacitor manufacturing companies require initial destructive tests to prove the existence of voids revealed by the software, before integrating the system into the commercial production stage.

On the other hand, AMI technology differs from transmission scanning and X-ray inspection techniques. While acoustic inspection relies on forming images layer-by-layer, X-rays produce composite images that penetrate through the entire structure of the sample. The two technologies are complementary; X-ray is preferred for spherical samples such as Ball Grid Arrays (BGA), while acoustic inspection excels in detecting thin layer delamination.

Machine Learning Applications and Rotary Technologies to Increase Speed

One of the biggest obstacles for AMI technology is keeping up with the speed of production lines and the accelerating complexity of chips; inspection is no longer limited to a single flip chip, but has extended to include multi-die stacks. To solve this problem, machine learning algorithms were introduced to distinguish Through-Silicon Via (TSV) patterns that resemble delaminations in shape, which prevents them from being automatically counted as defects and reduces the rate of false alarms.

To address the slowness of traditional raster scanning systems, which require slowing down movement at the end of each line, modern solutions such as the SpinSAM tool have been developed, which provides continuous rotational movement for silicon wafers. This mechanism allows for scanning four 300 mm wafers simultaneously at a higher speed and without the need to assemble segmented images, which maintains imaging accuracy and achieves the high productivity required in modern factories.

Why Does This Development Matter in the Semiconductor Industry?

With the transition to chiplet architecture and 3D integration, the cost resulting from a defective chip passing to the final assembly stages becomes very high. Advanced acoustic inspection integrated with artificial intelligence gives quality engineers the ability to detect mechanical and thermal defects at early stages, which protects supply chains and ensures operational efficiency in high-performance computing and smart automotive applications.

News source
Semiconductor Engineering
Open original source ↗
c
Author

certi.news Editorial Team

In the same category

You may also like

View all news