Jackery has launched the HomePower 1000 Plus v2 portable power station, a version intended for home use, travel, and worksites. Its main change is the ability to expand its capacity rather than rely solely on the base battery. The source states that the base unit provides a capacity of 1024 kWh, and that up to five expansion units with a capacity of 2 kWh each can be added, reaching a total capacity of up to 11 kWh. It should be noted that the unit of the base capacity given in the source requires editorial review, as it appears inconsistent with the rest of the figures mentioned in the article.
Higher Output and a Compact Design
The battery uses lithium iron phosphate (LFP) cells with a stated lifespan of 6,000 charging cycles and a five-year warranty. Jackery uses a cell-to-pack design that integrates the cells into the battery structure, a design that the source says helps make the unit more durable, lighter, and smaller.
The HomePower 1000 Plus v2 measures approximately 12.4 × 7.9 × 9.2 inches and weighs 23.8 pounds. Continuous output rises to 1,800 watts, with a peak output of 3,600 watts, distributed across four 120-volt AC outlets. This is an increase over the previous generation, which provided 1,500 watts continuously and 3,000 watts at peak through three outlets. According to the source, this output makes the battery practically capable of handling loads that can be connected to a 120-volt, 15-amp circuit, but it is generally not sufficient to power an entire home, except for smaller uses such as cabins or low-load homes.
Multiple Ports and Backup Functions
The unit includes a 12-volt, 10-amp DC port, two USB-C ports rated at 140 watts and 30 watts, and an 18-watt USB-A port. It also includes an LED light that can be operated continuously or set to send an SOS signal in Morse code.
The battery supports operation as an uninterruptible power supply (UPS) with a transfer time of 10 milliseconds and pure sine-wave AC output. This could make it suitable for devices such as desktop computers, 3D printers, and audio-visual equipment, particularly during power outages or fluctuations. Jackery also provides built-in protection against voltage surges rated at 3 kV/1,000 J. The battery management system and control system automatically cut off power when a voltage or current disturbance is detected, while the outer layer is made from fire-resistant materials.
Charging and Solar Power
The battery can be charged via AC to 80% in 36 minutes and to 100% in 50 minutes. When passing current through to power other devices while charging, the unit reduces the charging speed to avoid loading the outlet beyond its capacity.
The HomePower 1000 Plus v2 supports two DC8020 inputs. One accepts a voltage between 16 and 60 volts and current of up to 12 amps, while the two inputs together operate at a maximum of 400 watts and 21 amps. A full charge via DC takes approximately two hours and 43 minutes, or 47 minutes when combining the AC and DC inputs. The “self-operation” mode also allows solar power to be prioritized when it is connected simultaneously with the grid.
What Changes in Practice?
The importance of the new version lies in combining portability with the ability to increase capacity at the point of use. It could benefit apartment residents and renters who cannot make major electrical modifications to a building, and the units can be moved when changing residences. It can be used to power a refrigerator, essential home equipment, or home medical devices, or to reduce reliance on the grid during high-rate hours, although this depends on the nature of the load and the electricity plan.
The article points to uses in workshops and worksites, where it could eliminate the need to run long cables or operate a fuel-powered generator, in addition to supporting photography equipment, presentations, and exhibitions. These uses do not mean, however, that the battery is a complete replacement for home energy-storage systems; power and capacity limits, along with the need for expansion units, remain decisive factors.
Price and Limitations of the Initial Assessment
The advertised price starts at $749, while the introductory promotional price is $619. A 200-watt portable solar panel adds approximately $200. The basic battery package with a 2,000 kWh expansion unit costs $1,499 at the advertised price and $1,269 on promotion, while the package including two solar panels and an expansion unit costs $2,139, or $1,809 during the sale. The 2,000 kWh capacity listed for the expansion unit also requires verification of the unit as stated in the source.
The article’s author initially tested the unit they received by running fans, a computer, a 12,000-BTU window air conditioner, a washing machine, kitchen appliances, and a dishwasher. They said it temporarily exceeded the 1,800-watt continuous-output rating and reached a 1% charge level. However, the author explained that the tests were not yet complete and that they had not tested the app, expansion units, or solar panels. Therefore, these observations should not be treated as a comprehensive independent test of battery life or performance under all conditions.